Description
Cuts up to 3/8 in. mild steel. The unit offers easy connection to 120V or 240V input with Auto-Line technology and MVP Adapters.
Rated Cutting Capacity
The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements.
XT30 Torch & Quick Connect Work Lead and Clamp
Ergonomic handle with unique no-slip grip, thumb guide and finger contours help prevent operator fatigue while the flexible cable makes maneuvering easy. Comes with the ultra flexible Quick Connect work lead with smaller heavy duty clamp.
Auto-Line™ and MVP™ (multi-voltage plug) Adapters
Auto-Line provides state-of-the-art flexibility to the end user. The Auto-Line circuitry automatically connects to 120–240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. Miller’s multi-voltage plug (MVP™) Adapters allow connection to 120 or 240 V receptacles without tools—choose the adapter that fits the receptacle and connect it to the power cord.
Portability
Portable in the shop or at the job site—at 19 lb the shoulder strap allows the end user to easily move from location to location.
Automatic Air Regulation
The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting and gouging performance.
Auto-Refire™ Technology
Provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal—all automatically! No need for manual re-triggering which reduces user hand fatigue.
Protective X-CASE™
Miller's X-CASE provides ultimate protection during transport and storage. Additional space is ideal for MVP Plug Adapters, consumable box, as well as gloves, eye protection, etc.
Generator Compatible
Will be able to operate and provide full output when powered by an engine-driven welder with 7000 Watt (7K) output or higher, such as a Miller Bobcat or Trailblazer. Limited output will occur when used with smaller generators.
Fan-On-Demand™
Power source cooling system operates only when needed, reducing noise, energy use, and the amount of contaminants pulled through machine.
Includes
-
Plasma cutter
-
XT30 hand-held torch with 12 ft (3.7 m) cable.
-
Heavy-duty work clamp with 12 ft (3.7 m) cable
-
X-CASE Storage Case
-
10 ft (3 m) MVP power cord
-
Consumables box with 2 electrodes, 2 tips, 1 air deflector, and air fitting
-
MVP plugs 5-15P (115 V, 15 A), 6-50P (230 V, 50 A)
